Specification for ballast

Operating Temperature: -40℃ to 105℃

Steady State Light Output: 3000±200 lumens typical (bulb type dependant)

Turn on Light Output : >70% at 2 seconds, >85% at 3 seconds

Expected Ballast Life: >3500 hrs

Radiated EMI Susceptibility: S95/54/EC

Radiated EMI Emissions: S95/54/EC

Cooling: Air cooled

Maximum cable length: 500mm

Output wave form: 125±25Hz square wave

Steady state output power: 35W±3W

Open lamp circuit protection: latch off after 1 second

Shot circuit protection: latch off after 1 second

Maximum output current: 8A initial lamps on, 3A next 2 seconds

Maximum output power: 80W

Steady state output volts: 85V±17V

Striking voltage: 23000V

Flickering: no flickering during steady status

ELECTRICAL INPUT

Steady state output volts: 9-16V

Max in rush current: 15A at 50ms, 8A at 2secs Decreasing to steady within 30 seconds

Max steady state input power: 45W(9 to 16V)

Input turn on: 9V and above

Input turn off: below 8V

Reverse voltage protection: no damage to ballast with -40V

Conducted EMI Susceptibility: S95/54/EC

Conducted EMI Emission: S95/54/EC

Efficiency: Over 90% during steady status